SootySport 23 Posted September 13, 2020 How do you seperate the linkage ball joints? need to have the box out to change clutch. Share this post Link to post Share on other sites
Tom Fenton 1,518 Posted September 13, 2020 Easiest way is a suitable size open ended spanner and lever them off. Share this post Link to post Share on other sites
SootySport 23 Posted September 13, 2020 So they just pop off with no secret catches, screws or springs? Share this post Link to post Share on other sites
Thijs_Rallye 86 4 Cars Posted September 14, 2020 Yes, as long as the hole is sorta above the ball. Don't force them off if they are slanted to one side. 16mm spanner works fine. Share this post Link to post Share on other sites
SootySport 23 Posted September 14, 2020 Ok boys, I'll give that a try, thanks. Share this post Link to post Share on other sites
jackherer 543 Posted September 15, 2020 Some aftermarket upgraded rods have locking pins that need to come out first. Share this post Link to post Share on other sites