Chrisgti87 0 Posted May 22, 2020 Anyone fitted the narrow maxi motorsport arches and have pictures? There’s a lip on the bottom of them don’t know whether to chop it off or leave it on. Cheers Share this post Link to post Share on other sites
calvinhorse 870 Posted May 23, 2020 The lip that goes over the sill? I left mine on as it looks more complete, depends on the colour of the car I guess Share this post Link to post Share on other sites
SweetBadger 91 Posted May 23, 2020 Pic of them fitted to the old race car Share this post Link to post Share on other sites
Chrisgti87 0 Posted June 24, 2020 Cheers for the pictures I got them riveted on. Is that base model doors you have fitted there or have you just smoothed off the pins for the door trim? Cheers Share this post Link to post Share on other sites
petert 549 Posted June 24, 2020 I used rivnuts and screwed them on (with low strength Loctite ) with stainless button head screws and washers. Share this post Link to post Share on other sites
SweetBadger 91 Posted June 25, 2020 12 hours ago, Chrisgti87 said: Cheers for the pictures I got them riveted on. Is that base model doors you have fitted there or have you just smoothed off the pins for the door trim? Cheers They are Gti doors with rivets removed and an adhesive stripe covering them. Bit of a cheat, but fine for a race / track car. Stripe I used is available here: https://www.ebay.co.uk/itm/192901457605 Share this post Link to post Share on other sites
