Rear water flange installion

[idoari 10]

Hi, i want to install the rear water flange.

I don't have the genuine flange - i order a FEBI one, I have the geuine oring seal though.

 

My question is do i need to put RTV on the oring and/or the seal or the seal with some silicone grease is enough?

 

I want to avoid to use RTV if possiable because in a lot of cases it can clog water passages.

 

Thanks

Ido

 

 

[Tom Fenton 1,524]

I personally would use a small amount of RTV. Anyone who clogs water passages with it is simply using FAR too much. You need a thin smear and no more.

[Ozymandis 96]

+1, thin smear RTV.

 

About 3 months ago I saw one that had loads of RTV, and the pressure when it was tightened up, snapped off the outer plastic "wall" of the O ring recess in the moulding, ruining it.