Jump to content

Welcome to the brand new 205GTIDrivers.com website! We hope you'll enjoy it! Read the full notice here.

j_turnell

Base Map - Low Boost Lynx Kit On Omex

Recommended Posts

j_turnell

Does anyone have a map for a low boost lynx setup on Omex 600? Just needed to get up and running before mapping.

 

cheers, James

Share this post


Link to post
Share on other sites
welshpug

bung the stock injectors in and disconnect the boost pipes and it'll run on your old map, probably need some fuel pulling out.

 

highly unlikely you'll find a non magnetti map for low boost or high boost.

Share this post


Link to post
Share on other sites
j_turnell

I know it's a long shot. Would be nice to drive it over to get mapped rather than having it trailered.

Share this post


Link to post
Share on other sites
Liam

ring omex they will send you something to get it running

Share this post


Link to post
Share on other sites
welshpug

I wouldn't drive it even if you found a map tbh, not worth the risk.

Share this post


Link to post
Share on other sites
Miles

Omex only having working maps, You'll be surprised what can run what, Had a 1.6 8v on bodies running on a 200bhp 16v map last week, mid range was fine but after 5 is went flat, LOL

 

The std base map from a 16v should get it running with std injectors as WP said

Share this post


Link to post
Share on other sites
Tom Fenton

NA stuff will just go lean and not likely to cause much issue. Anything forced induction if it goes lean on boost its bye bye pistons. Get it running then transport it for setting up. Compared to the overall cost it's not a lot of cash to have it taken to the mapper.

Share this post


Link to post
Share on other sites
j_turnell

I would only drive it if I can get a map for a charged gti-6 and pootle over there as its not far. I will speak to NM and see if they have mapped one before, if not then I'll sort a trailer out when the time comes.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×