Omex Problem

[daneldridge23 15]

hi guys

I have an omex 600 ecu and there basic loom

do the injector leads have to be round the way the cylinders are ordered on the car, IE the no1 lead goes on gear box end etc?

at the minute the leads are on no 1 to 4 right to left (if that makes sense)

I'm getting alot of backfiring and flames out of my tbs?

getting fed up of trying to work it all out!

 

Cheers Guys

Dan

[welshpug 1,621]

Its a batch fire system so it doesn't matter which plug goes where.

[allanallen 528 2 Cars]

They're batched so the two outer injectors will be 1 pair and the inners will be the other pair, if that makes sense.

Have a look at the instructions,and chase the wires back to the plug if you're struggling. its very simple

 

http://omextechnology.co.uk/600%20ECU%20Installation%20Manual%202v01.pdf

[daneldridge23 15]

could the ht leads be paired wrong on the pack?

[allanallen 528 2 Cars]

could the ht leads be paired wrong on the pack?

Yes

[daneldridge23 15]

there numbered on the pack, which i have then put no1 on the pack to no1 cylnder etc?

 

should i swap 1+4 and 2 + 3 or am i already correct?

[welshpug 1,621]

try it, it may be wired up the wrong way round.

[daneldridge23 15]

cool ill have a look tommorow and let you know, its so close yet so far!