Need Some Help With Megasquirt 2/v3.57 Turbo Ignition Map

[opticaltrigger 52]

Hi all,

Been a while since I last posted but work on the racecar has progressed a little and we have the Megasquirt all wired in now and the time has come to try starting it.

I've laid down the VE table and AFR table using the table generator tool in Tunerstudio but now I need to lay down an ignition map for a turbo motor.

The motor spec goes a bit like this:-

 

Megasquirt 2 Extra / v3.57

1900 cc

8 valve

Turbo (max boost 15psi)

EDIS, based ignition

 

I was hoping some of you guys out there that have done more of this would have an ignition map for a similar spec motor that I could look at and get me in the right direction to start with or possibly someone might have a whole msq. file for a motor like this that I could take a peek at.

 

Any way all the very best guys

O.T.

Edited October 19, 2013 by opticaltrigger

[madspikes 41 1 Cars]

You can have a copy of my 1.9 Supercharged map just to get you started if your still looking. The car runs 7psi boost, and wasted spark ignition.

 

Clive

[opticaltrigger 52]

Yes please Clive,that would be great.Thanks very much mate.

I stll havent tried to start it yet as I am still unsure on some areas,but possibly we might try to fire it in the next week or so.

It would be great to get a look at the map and see how far off the mark I am with my attempts.

 

Anyway thanks again Clive,very much appreciated.

All the very best

 

O.T.