Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

welshpug

[car_overhaul] Zx 16V Project Pt2, Re-Shell And Power Upgrades....

Recommended Posts

welshpug

Following on from my previous ZX thread which ended abruptly on a slippery roundabout with a Sill+post interface, the search was on for a replacement shell, 6 months on I found a Silver 16v on a K plate which was being broken for spares, ended up getting this for free!

 

No pics as yet as it was Dark when I first saw the car, my friend AdamB did the road trip with his P2 Volvo V70 T5 spitting flames and using lots of fuel :lol: at the moment its parked up at Goliath's in Gloucester as I haven't space here in the valleys.

 

Also had good news last Wednesday in that the insurance claim against the Micra driver that took out the offside front corner by turning right across me has finally been settled in full, 18 months on!! I think I will be getting around £900 all in, which isn't bad.

 

 

Had a spare hour this afternoon after work, so dug out some bits I have collected recently, and took some pics of just how much space there is up front in a ZX, and weighing up whether I will use the cut down inlet I bought, or cut another one I have spare and make it even longer....

 

As it was before taking it apart

 

7315732244_c13f5d28ae.jpg

 

Space between bumper and fans, rad and fan cowling removed, epic amount of space...

 

7315726032_96be3bd2e9.jpg7315721942_0ef3da998f.jpg

 

Inlet stripped off....

 

7315714348_9f06eb8207.jpg

 

7315709904_acf8ba7edc.jpg

 

 

 

BWARP....

 

7315705854_7915930bcb.jpg

 

stuck the bonnet down and tried to get a pic of how much vertical space I have to play with

 

7315733906_1322f7dda1.jpg

 

enough to get a filter on easily! but looks like I have a ton of space to get more length....

  • Like 1

Share this post


Link to post
Share on other sites
welshpug

few more pics...

 

 

 

7315999068_4dc0671fb8.jpg

 

 

 

current inlet length from the head face

 

7316006232_47953e4df3.jpg

 

 

Not sure what rad I could use to gain the space, maybe a BBM/Radtec shortened large capacity unit.

  • Like 1

Share this post


Link to post
Share on other sites
kyepan

Awesome, you could put some massive trumpets on that. It would sound amazing.

Share this post


Link to post
Share on other sites
Alan_M

Are those GSXR750 bodies?

Share this post


Link to post
Share on other sites
welshpug

i believe so yeah, same as the 1000 engine, not sure which year, they are 50 mm tapering to 42 at the butterfly then straight 42, iirc 48mm od where they meet the manifold, for which i have a 12mm thick piece about 65x380 which will be welded on much like Colin satchell does.

 

given the space i have to play with i may chop a second gti6 manifold, possiblty usilise the trumpets they have if its feasible, might sound quite similar to the original note!

Share this post


Link to post
Share on other sites
Alan_M

I'll be interested in this thread then. I've a set in the garage, which I was going to get rid of. This build has given me second thoughts.

 

Seemingly, the Sandy/Colin manifolds are drying up though.

Share this post


Link to post
Share on other sites
kyepan

Those manifolds took more time than they were worth in money to Colin because he was fabricating the entire manifolds from scratch. He's doing some chopped down gti-6 manifolds with dcoe bodies now. They seem quite popular with his customers.

Edited by kyepan

Share this post


Link to post
Share on other sites
welshpug

Take one spare inlet manifold:

 

7169177921_bc8fdd1590_z.jpg

 

Attack it with an angle grinder...

 

7169181589_8317b45c06_z.jpg7169184701_fb3b3ce521_z.jpg

 

try it in the engine bay...

 

7354402898_4009c690a9_z.jpg

 

Pointing down a little too far on their longest point, but a little further back from that will give a nice angle, yet to measure what total length will be.

Share this post


Link to post
Share on other sites
welshpug

Standard inlet centreline length from the head face is 330mm, makes total length roughly 380mm.

 

7169302725_aeaa9879f4_z.jpg

 

7169296365_4762a8ee4c_z.jpg

Share this post


Link to post
Share on other sites
James504

I always wanted to see what the trumpets in the gti6 manifold looked like. Cheers! I like where you are going here!

Share this post


Link to post
Share on other sites
DrSarty

I think you're going about things the right way Mei. I'm always keen to see innovation.

 

P.S. IIRC, Sandy said the optimum overall tract length was 380mm ish after his experimentation, so that seems to coincide with Peugeot's own findings.

  • Like 1

Share this post


Link to post
Share on other sites
welshpug

so, err, yeah...

 

7856385496_611200a2e5.jpg

 

 

Oh and Goliath dragged this over today, cheers George!

 

it has a remodelled drivers door courtesy of a brick wall somewhere, a rusty drivers arch, knackered rear bumper and a smashed rear screen :blink: oh and a cracked windscreen! :wacko: But it was free. :D

 

7887837772_2222c1318a_z.jpg

 

Apparently the HG or bottom end has gone on this engine, not that it matters, as I have my RFS lump to drop in.

 

Obviously will clean the bay, maybe a lick of paint if required.

 

7887874362_e1705fc9e0_z.jpg

Edited by welshpug

Share this post


Link to post
Share on other sites
dcc

scrap it.

  • Like 1

Share this post


Link to post
Share on other sites
welshpug

Faster than yours :P

Share this post


Link to post
Share on other sites
kyepan

wonder what one of those would be like on bodies! a suprise i bet.

  • Like 1

Share this post


Link to post
Share on other sites
dcc

not faster when you plant it into every lampost on every roundabout in Newport!

  • Like 3

Share this post


Link to post
Share on other sites
welshpug

it wasn't Newport :P

Share this post


Link to post
Share on other sites
CosKev

Quite like the ZX for some strange reason <_<

 

Could be from my younger days when a Volcane blew me away! :blush:

Share this post


Link to post
Share on other sites
MiniGibbo

Don't think I've ever seen a modified citroen zx...

Share this post


Link to post
Share on other sites
welshpug

you haven't been looking hard enough then :lol: or you're still a kid...

 

Dakar winners 94 95 and 96, very similar mechanically to the 205/405T16's.

 

citroen94w.jpg

 

ZX Kitcars, came along the same time as the 306 Maxi's...

 

573.jpg

 

zx_kitcar6.jpg

 

 

and lastly Kenneth Hansen's 500 bhp rallycross car.

 

hansen.jpg

Edited by welshpug

Share this post


Link to post
Share on other sites
MiniGibbo

I was 5 in 1994........

 

Does have the grounds for an epic sleeper though, what's a zx weigh in at..?

Share this post


Link to post
Share on other sites
welshpug

1150 stock, less than 306 s16, i run lighter wheels + tyres so around 1110 ish.

Share this post


Link to post
Share on other sites
welshpug

Made a start on getting the silver shell ready yesterday in between helping my mate Richard (Spannerman) change the clutch on a Mk7 Transit crewcab tipper twinwheel 100 PS.

 

Previous owner had somehow managed to break the rear screen, I can only imagine in attempting to remove the rear spoiler :wacko:

 

7907672606_7bc7a42f27.jpg

 

less of the street diamonds to hurt myself on! and a pile of trim bits...

 

7907695244_fca72a435e.jpg

 

from pulling out the seats dash heater box, to get at the carpet which was torn and flthy....

 

7907691334_5886e087d8.jpg

7907699292_7d912d7938.jpg

 

and to get at the heater matrix which was donald ducked.

 

7907686488_d24107c5da.jpg

then this morning Helped Rich sort his garage out and move stuff around, and got the donor in the dry ready to crack on.

 

7916051690_476d27abd6.jpg

  • Like 1

Share this post


Link to post
Share on other sites
welshpug

Later on today after lunch and the F1 GP, thought I may as well get more done and start tearing the black bent car apart, this one similarly had the street diamonds scattered everywhere and a pretty damp carpet, but most importantly it was in once piece, the heater matrix in this car is under a year old as well, 2 hours later and all the seats carpet dash and heater box is out.

 

7915154736_0f3efdac75.jpg

 

Jetwashed the carpet off in the back yard and put it on the workshop roof to dry out, is now hanging over the bannisters waiting for the bath to be free....

Share this post


Link to post
Share on other sites
MiniGibbo

Whats the score with the interior then dude.? you going fully stripped, partial or full fat..?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×