Jump to content

205GTIDrivers.com has just received a major redesign and the update is still in progress, so please bear with us. You may want to clear your browser's cache and cookies for this site. Sorry for the inconvenience.
Also, we invite you to post feedback in this topic: http://www.205gtidrivers.com/topic/171489-new-website-feeback/ 

Sign in to follow this  
custard-rallye

Clutch Fork?

Recommended Posts

custard-rallye

was driving home tonight went round a corner to find a more or less half a tree on the road couldnt swerve because a car was on the other side so went over it, it ripped the clutch cable out and bent the fork that the cable connects to on the g-box casing.

 

so i was wanting to no if i could use the fork off of my 106 xsi until i get another one oh and its a 205 rallye i have

Edited by custard-rallye

Share this post


Link to post
Share on other sites
swordfish210

i cant see it being a problem, just have a good look at both of them to see if they look the same.

Share this post


Link to post
Share on other sites
custard-rallye

how do you get the fork off does anybody know?

Share this post


Link to post
Share on other sites
custard-rallye

anybody no?

Share this post


Link to post
Share on other sites
welshpug

take the gearbox off, remove the arm, remove upper bush, slide fork up out of lower bearing, then back down at an angle.

 

 

the one off the 106 will be identical (same part number and all!)

 

 

I'd be more inclined to get a new one, part numbers as follows;

 

217512 FORK BEARING 0.65 GBP

 

217511 FORK BEARING 1.47 GBP

 

211752 FORK LEVER 63.43 GBP (that's the fork arm and pin)

Edited by welshpug

Share this post


Link to post
Share on other sites
CosKev
take the gearbox off, remove the arm, remove upper bush, slide fork up out of lower bearing, then back down at an angle.

 

LOL B)

Good luck with that part!!!!! :blush:

 

As above,I bought new when I did mine ;)

Share this post


Link to post
Share on other sites
custard-rallye

is the prices trade as i will get them trade?

Share this post


Link to post
Share on other sites
welshpug

nope they're just straight of servicebox, you'll more than likely get 10 or 15% off that if you can get trade.

Share this post


Link to post
Share on other sites
bren_1.3
LOL

Good luck with that part!!!!!

 

agreed! the pin is often siezed solid, and at an impossible angle to knock out in situ!

Share this post


Link to post
Share on other sites
Sign in to follow this  

×